±ê×¼¹âÄ£¿é
1x9 2.5Gbps BiDi Transceiver Module
Specifications
- ²úÆ·ÐͺÅ: FTTR-Bxx24-XXX(XXXX)
- ¼æÈÝÆ·ÅÆ: ȫϵÁÐ
- ·â×°ÀàÐÍ: 1x9
- ´«ÊäËÙÂÊ: 1x9 2.5Gbps Bi-Di Transceiver Module
- ´«Êä¾àÀë: 2~160km
- ·¢É䲨³¤: 1x9 2.5Gbps Bi-Di Transceiver Module
- ÎüÊÕ²¨³¤: 1x9 2.5Gbps Bi-Di Transceiver Module
- ÊÂÇéζÈ: ÉÌÒµ¼¶0¡æ¡«+70¡æ/¹¤Òµ¼¶-40¡æ¡«+85¡æ ¿ÉÑ¡
- Êý×ÖÕï¶Ï: ²»´øDDM
- ÎüÊÕѸËÙ¶È: 1x9 2.5Gbps Bi-Di Transceiver Module
- ÎüÊÕѸËÙ¶È: 1x9 2.5Gbps Bi-Di Transceiver Module
Description
1x9 2.488Gbps Bi-Di Transceiver Module
Product Description
F-tone¡¯sFTTR-BXX24-XXX series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules support data rates up to 2488 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The FTTR-BXX24-XXX series is high performance module for single fiber communications. The transmitter section uses a DFB laser diode and is a class 1 laser compliant according to International Safety Standard IEC-825.
Product Features
- Single Fiber Bi-Directional Transceiver
- DFB /CWDM Laser Diode Transmitter
- Up to 0~120Km with 9/125¦Ìm SMF
- Data rates Up to 2488Mbps
- Industry Standard 1 x 9 Footprint
- Simplex SC/FC/ST Connector
- PECL signal input and output, TTL logic level signal detect output
- Single 3.3V power supply
- Class 1 Laser International Safety Standard IEC 825 Compliant
- Wave solderable and washable with process plug inserted
- ESD Level: 4
- Compatible with ROSH6
- MSL Level: 1
- Two temperature ranges:
¡ª 0¡ãC to +70¡ãC
¡ª -40¡ãC to +85¡ãC for industry level
Application
- ATM
- SONET/SDH Equipment Interconnect
- Fiber channel
Absolute Maximum Ratings
Operating of the transceiver beyond the Absolute Conditions Listed in Table 1 will degrade or damage the product. It¡¯s not implied that the product would function above the recommended operating environment, it¡¯s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
|
Parameter |
Symbol |
Min |
Max |
Units |
|
Storage Temperature |
TST |
-40 |
+85 |
¡æ |
|
Supply Voltage |
VCC |
0 |
+3.6 |
V |
|
Relative Humidity |
RH |
5 |
95 |
% |
Table 2-- Recommended Operating Environment
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
||
|
Supply Voltage |
VCC3.3V |
+3.1 |
+3.3 |
+3.5 |
V |
||
|
Supply Current |
Icc |
- |
- |
200 |
mA |
||
|
Operating Case Temperature |
Commerce level |
TOP |
0 |
+70 |
¡æ |
||
|
Industry level |
-40 |
+85 |
|||||
|
Data Rate |
B |
- |
1250 |
- |
Mbits/s |
||
|
Soldering temperature |
- |
- |
260 |
¡æ |
|||
|
Soldering duration |
- |
- |
10 |
Sec |
|||
Optical Parameters
Table 3-- FTTR-B1324-20XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25¡À5¡ãC, VCC = 3.3¡À0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
¦ËC |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width (-20dB) |
¦Ë |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-5 |
- |
0 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
¦ËC |
1500 |
1550 |
1580 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-18 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Table 4--FTTR-B1524-20XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25¡À5¡ãC, VCC = 3.3¡À0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
¦ËC |
1500 |
1550 |
1580 |
nm |
|
Output Spectral width (-20dB) |
¦Ë |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-5 |
- |
0 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
¦ËC |
1260 |
1310 |
1360 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-18 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Table 5-- FTTR-B1324-40XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25¡À5¡ãC, VCC = 3.3¡À0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
¦ËC |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width (-20dB) |
¦Ë |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-2 |
- |
+3 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
¦ËC |
1500 |
1550 |
1580 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-18 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Table 6--FTTR-B1524-40XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25¡À5¡ãC, VCC = 3.3¡À0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
¦ËC |
1500 |
1550 |
1580 |
nm |
|
Output Spectral width (-20dB) |
¦Ë |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-2 |
- |
+3 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
¦ËC |
1260 |
1310 |
1360 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-18 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Table 7-- FTTR-B4524-40XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25¡À5¡ãC, VCC = 3.3¡À0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
¦ËC |
1483 |
1490 |
1497 |
nm |
|
Output Spectral width (-20dB) |
¦Ë |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-2 |
- |
+3 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
¦ËC |
1540 |
1550 |
1560 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-18 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Table 8--FTTR-B5424-40XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25¡À5¡ãC, VCC = 3.3¡À0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
¦ËC |
1543 |
1550 |
1557 |
nm |
|
Output Spectral width (-20dB) |
¦Ë |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-2 |
- |
+3 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
¦ËC |
1480 |
1490 |
1500 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-18 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Table 9-- FTTR-B4524-60XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25¡À5¡ãC, VCC = 3.3¡À0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
¦ËC |
1483 |
1490 |
1497 |
nm |
|
Output Spectral width (-20dB) |
¦Ë |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-2 |
- |
+3 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
¦ËC |
1540 |
1550 |
1560 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-20 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-20 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Table 10--FTTR-B5424-60XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25¡À5¡ãC, VCC = 3.3¡À0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
¦ËC |
1543 |
1550 |
1557 |
nm |
|
Output Spectral width (-20dB) |
¦Ë |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-2 |
- |
+3 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
¦ËC |
1480 |
1490 |
1500 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-20 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-20 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Electrical Parameters
Table 11-- (Ambient Operating Temperature Ta=+25¡À5¡ãC, VCC = 3.3¡À0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data Input Current - Low |
IIL |
-350 |
- |
- |
¦ÌA |
|
Data Input Current - High |
IIL |
- |
- |
350 |
¦ÌA |
|
Data Input Voltage - Low |
VIL- VCC |
-1.81 |
- |
-1.48 |
V |
|
Data Input Voltage - High |
VIH- VCC |
-1.17 |
- |
-0.88 |
V |
|
Receiver |
|||||
|
Data Output Voltage ¨C Low |
VOL - VCC |
-1.83 |
- |
-1.56 |
V |
|
Data Output Voltage ¨C High |
VOH - VCC |
-1.09 |
- |
-0.88 |
V |
|
Signal Detect Output Voltage-Low |
VOL - VCC |
-1.83 |
- |
-1.56 |
V |
|
Signal Detect Output Voltage-High |
VOH - VCC |
-1.09 |
- |
-0.88 |
V |
Pin Assignment & Signal Definition
Table 12--Connector pin assignment
|
Pin # |
Pin Name |
Description |
|
1 |
Rx VEE |
Receiver Signal Ground |
|
2 |
RD+ |
Receiver Data Out |
|
3 |
RD- |
Receiver Data Out Bar |
|
4 |
SD |
Signal Detect |
|
5 |
Rx VCC |
Receiver Power Supply |
|
6 |
Tx VCC |
Transmitter Power Supply |
|
7 |
TD- |
Transmitter Data In Bar |
|
8 |
TD+ |
Transmitter Data In |
|
9 |
Tx VEE |
Transmitter Ground |
Regulatory Compliance
F-tone NetworksOptical transceiver is designed to be Class I Laser safety compliant and is certified per the following standards:
|
Feature |
Agency |
Standard |
|
Laser Safety |
FDA |
CDRH 21 CFR 1040 annd Laser Notice No. 50 |
|
Product Safety |
BST |
EN 60825-1£º2007 EN 60825-2£º2004 EN 60950-1£º2006 |
|
Environmental protection |
SGS |
RoHS Directive 2002/95/EC |
|
EMC |
WALTEK |
EN 55022:2006+A1:2007 EN 55024:1998+A1+A2:2003 - |
Ordering information
|
Part Number |
Product Description |
|
FTTR-B1324-20 |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-SC;0 to +70¡ãC |
|
FTTR-B1524-20 |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-SC;0 to +70¡ãC |
|
FTTR-B1324-20F |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-FC;0 to +70¡ãC |
|
FTTR-B1524-20F |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-FC;0 to +70¡ãC |
|
FTTR-B1324-20T |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-ST;0 to +70¡ãC |
|
FTTR-B1524-20T |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-ST;0 to +70¡ãC |
|
FTTR-B1324-40 |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;0 to +70¡ãC |
|
FTTR-B1524-40 |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;0 to +70¡ãC |
|
FTTR-B1324-40F |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;0 to +70¡ãC |
|
FTTR-B1524-40F |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;0 to +70¡ãC |
|
FTTR-B1324-40T |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;0 to +70¡ãC |
|
FTTR-B1524-40T |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;0 to +70¡ãC |
|
FTTR-B4524-40 |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;0 to +70¡ãC |
|
FTTR-B5424-40 |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;0 to +70¡ãC |
|
FTTR-B4524-40F |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;0 to +70¡ãC |
|
FTTR-B5424-40F |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;0 to +70¡ãC |
|
FTTR-B4524-40T |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;0 to +70¡ãC |
|
FTTR-B5424-40T |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;0 to +70¡ãC |
|
FTTR-B4524-60 |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-SC;0 to +70¡ãC |
|
FTTR-B5424-60 |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-SC;0 to +70¡ãC |
|
FTTR-B4524-60F |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-FC;0 to +70¡ãC |
|
FTTR-B5424-60F |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-FC;0 to +70¡ãC |
|
FTTR-B4524-60T |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-ST;0 to +70¡ãC |
|
FTTR-B5424-60T |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-ST;0 to +70¡ãC |
|
FTTR-B1324-20I |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-SC;-40 to +85¡ãC |
|
FTTR-B1524-20I |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-SC;-40 to +85¡ãC |
|
FTTR-B1324-20FI |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-FC;-40 to +85¡ãC |
|
FTTR-B1524-20FI |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-FC;-40 to +85¡ãC |
|
FTTR-B1324-20TI |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-ST;-40 to +85¡ãC |
|
FTTR-B1524-20TI |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-ST;-40 to +85¡ãC |
|
FTTR-B1324-40I |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;-40 to +85¡ãC |
|
FTTR-B1524-40I |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;-40 to +85¡ãC |
|
FTTR-B1324-40FI |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;-40 to +85¡ãC |
|
FTTR-B1524-40FI |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;-40 to +85¡ãC |
|
FTTR-B1324-40TI |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;-40 to +85¡ãC |
|
FTTR-B1524-40TI |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;-40 to +85¡ãC |
|
FTTR-B4524-40I |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;-40 to +85¡ãC |
|
FTTR-B5424-40I |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;-40 to +85¡ãC |
|
FTTR-B4524-40FI |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;-40 to +85¡ãC |
|
FTTR-B5424-40FI |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;-40 to +85¡ãC |
|
FTTR-B4524-40TI |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;-40 to +85¡ãC |
|
FTTR-B5424-40TI |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;-40 to +85¡ãC |
|
FTTR-B4524-60I |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-SC;-40 to +85¡ãC |
|
FTTR-B5424-60I |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-SC;-40 to +85¡ãC |
|
FTTR-B4524-60FI |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-FC;-40 to +85¡ãC |
|
FTTR-B5424-60FI |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-FC;-40 to +85¡ãC |
|
FTTR-B4524-60TI |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-ST;-40 to +85¡ãC |
|
FTTR-B5424-60TI |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-ST;-40 to +85¡ãC |
|
80KM/120KM Customized Transceivers,Please contact our sales |
|
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-TONE NETWORKS before they become applicable to any particular order orcontract. In accordance with the F-TONE NETWORKS policy of continuous improvement specifications may changewithout notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-TONE NETWORKS or others. Further details are available from any F-TONE NETWORKS sales representative.
Related Products
622Mbps 1x9 SM Transceiver Module
622Mbps 1x9 SM Transceiver Module:F-tone¡¯s FTTR-1X06X-X series of transceiver modules are the perfect solution for high-speed communication networks.The transceiver modules support data rates up to 622Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver modules supplies the Differential PECL of3.3V, 5V, 3.3V/5.0V Voltage and provide the system designer with products to implement arange of FDDI and ATM (Asynchronous Transfer Mode) designs at the 622Mbps rateandSONET/OC-12, SDH/STM-4 for Telecommunication.Business level transceiver module which operating at 0¡æ to 70¡æ and Industry level which operating extended temperature as -40¡æ to +85¡æ for available.
3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module:F-tone¡¯s FTTR-1XU9-20/40X HD series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules may use different data rates (or data level)between transmitter and receiver, support data rates up to 3 Gbps. These modules are fully compliant with the Multi-sourced 1¡Á9 protocol.The FTTR-1XU9-20/40Xseries is high performance module forsingle fiber communications by using 1310nm/1550nm transmitterand 1550nm/1310nm receiver. The transmitter section uses a DFB(or FP) laser diode and is a class1 lasercompliant according to International Safety StandardIEC-825. The receiver section uses an integrated 1310nmdetector preamplifier (IDP) mounted in an optical headerand a limiting post-amplifier IC. A LVPECL/CML logic interfacesimplifies interface to external circuitry.
2.488Gbps 1x9 SM Transceiver Module
2.488Gbps 1x9 SM Transceiver Module£ºF-tone¡¯s FTTR-1524XXX series of transceiver modules are the perfect solution for high-speed communication networks.The transceiver modules support data rates up to 2.488Gbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver module supplies the Differential PECL of Single 3.3V Voltage and provides the system designer with products to implement arange of Fiber Channel and SDH STM-16 and SONET OC-48 system.Business level transceiver module which operating at 0¡æ to 70¡æ and Industry level which operating extended temperature as -40¡æ to +85¡æ for available.
155Mbps 1x9 BIDI MM Transceiver Module
155Mbps 1x9 BIDI MM Transceiver Module£ºF-tone¡¯s FTTR-BMxx03-02xx series of transceiver modules are the perfect solution for high-speed communication networks.The transceiver modules support data rates up to 155Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver module supplies the Differential PECL of3.3V, 5V, 3.3V/5.0V Voltage and provides the system designer with products to implement arange of FDDI and ATM designs at the 155Mbps rateand SONET/OC-3, SDH/STM-1 for Telecommunication.Commerce level transceiver module which operating at 0¡æ to 70¡æ for available.
- Operating case temperature:
Standard : 0 to +70¡ãC
Industrial : -40 to +85¡ãC
Low-speed Bi-Di TTL Transceiver Module
Low-speed Bi-Di TTL Transceiver Module£ºF-tone Networks¡¯sFTTR-Bxx01-20xx series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules supplies the TTL interface of 5.0 Voltage and provide the system designer with products to implement a range of low-speed data and fiber MODEM designs at the DC 0~2Mbps rate for fiber communications.These modules are fully compliant with the Multi-sourced 1x9 protocol.The FTTR-Bxx01-20xx series is high performance module for single fiber communications by using 1310/1550nm transmitter and 1550/1310nm receiver. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-825. The receiver section uses an integrated 1310/1550nm detector (PD) mounted in an optical header and a limiting post-amplifier IC. A TTL logic interface simplifies interface to external circuitry.
1.25Gbps Bi-Di Transceiver Module
1.25Gbps Bi-Di Transceiver Module£ºF-tone¡¯s FTTR-BXX12-XX series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules support data rates up to 1250 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The FTTR-BXX12-XX series is high performance module forsingle fiber communications by using 1310nm/1550nm transmitterand 1550nm/1310 nm receiver. The transmitter section uses a DFB laser diode and is a class1 lasercompliant according to International Safety StandardIEC-825. The receiver section uses an integrated 1310nmdetector preamplifier (IDP) mounted in an optical headerand a limiting post-amplifier IC. A PECL logic interfacesimplifies interface to external circuitry.