1x9 Transceiver,MM850nm,0~10M,0.5km

Product Description
F-tone¡¯s FTTR-xxL2-xxxx series of transceiver modules are the perfect solution for ultra-low speed communication networks.These transceiver modules support data rates up to 10Mbps. The module is fully compliant with the Multi-sourced 1x9 protocol.These transceiver modules provides the system designer with products to RS232/RS485/RS422 receptacle fiber transmission.

Product Features
¡ñ VCSEL/FP Laser Diode Transmitter
¡ñ Up to 2 Km on 62.5/125¦Ìm MMF£¬Up to 40 Km on 9/125¦Ìm SMF
¡ñ 3.3V or 5.0V power supply
¡ñ SC/ST/FC duplex optical interface
¡ñ (LV)TTL Inputs / Outputs and or( LV)TTL signal detect
¡ñ Class 1 Laser International Safety Standard IEC 825 Compliant
¡ñ Operating case temperature range (Standard£º0 to +70¡æ) or (Industrial£º -40¡ãC to +85¡ãC)

Application
¡ñ RS232/RS485/RS422 receptacle fiber transmission
¡ñ Other optic link

Absolute Maximum Ratings
Operating of the transceiver beyond the Absolute Conditions Listed in Table 1 will degrade or damage the product. It¡¯s not implied that the product would function above the recommended operating environment, it¡¯s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)

Table 1--- Absolute Maximum Conditions

Table 2--- Recommended Operating Environment and Electrical Characteristics

Note  
1.standard level
2.industrial level
3.Not recommended wave soldering.

Optical Parameters
Table 3--- FTTR-85L2-02 Transceiver Optical Characteristics(Ambient Operating Temperature Ta=+25¡À5¡ãC, VCC = 3.3 or 5.0¡À0.2V)

Note1£ºThe optical power is launched into 62.5/125¦Ìm MMF.
Note2£ºWith 10Mbps. If keep 0 1 level duty ratio of 45%:55%, sensitivity control as ¡Ü- 12dBm.

Table 4--- FTTR-M13L2-02 Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25¡À5¡ãC, VCC = 3.3 or 5.0¡À0.2V)

Note1£ºThe optical power is launched into 62.5/125¦Ìm MMF.
Note2£ºWith 10Mbps. If keep 0 1 level duty ratio of 45%:55%, sensitivity control as ¡Ü- 14dBm. 

Table 5--- FTTR-13L2-20 Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25¡À5¡ãC, VCC = 3.3 or 5.0¡À0.2V)

Note1£ºThe optical power is launched into 9/125¦Ìm SMF.
Note2£ºWith 10Mbps. If keep 0 1 level duty ratio of 45%:55%, sensitivity control as ¡Ü- 14dBm.

Table 6--- FTTR-13L2-40 Transceiver Optical Characteristics 
(Ambient Operating Temperature Ta=+25¡À5¡ãC, VCC = 3.3 or 5.0¡À0.2V)

Note1£ºThe optical power is launched into 9/125¦Ìm SMF.
Note2£ºWith 10Mbps. If keep 0 1 level duty ratio of 45%:55%, sensitivity control as ¡Ü- 15dBm. 

Electrical Parameters
Table 7--- Transceiver Electrical Characteristics 
(Ambient Operating Temperature Ta=+25¡À5¡ãC, VCC = 3.3 or 5.0¡À0.2V)

Note1£º(LV)TTL signal detect 

Module Outline Drawing£¨Units in mm)

SC receptacleTYPE1(common)

SC receptacle TYPE2

FC receptacle TYPE1(common)

FC receptacleTYPE2(plastic connector)

ST receptacle TYPE1(common)

ST receptacle TYPE2 (plastic connector)

Ordering information

大宝娱乐 | F-tone Networks
ÆóÒµÓÊÏ䣺sales@f-tone.com
ÆóÒµÍøÕ¾£ºwww.f-tone.com
ÆóÒµÍøÕ¾£ºwww.sfpgmk.com
ÆóÒµµç»°£º028-85255257
ÆóÒµ´«Õ棺028-85977702

×¢£º±¾²úÆ·ÓÐÌìϲú»¯ÐͺſÉÑ¡£¬½öչʾ²¿·Ö²ÎÊý£¬ÈôÓÐÐèÒª£¬ÇëÄúÁªÏµ大宝娱乐¡£

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.