兼容光�？�
AFBR-77EVK
Specifications
- 吸收迅速度: 40KM
- 吸收迅速度: 40KM
Description
- A Tx Board with an AFBR-77D1SZ Tx Module
- A Rx Board with an AFBR-78D1SZ Rx Module
- Necessary Optical Connectors and Cables for Establishing a Data Link
- iPort I2C Communication Interface and a MicroPOD Viewer GUI on CD
- Two Pairs of SMP-to-SMA Cables
- A Snap-and-Go Extraction Tool
- Access to Low Speed Signals (i.e., Int_L, Reset_L)
- 24 Side-mounted SMP Connectors for Connecting to 12 Differential Tx or Rx High Speed Lanes on Each Evaluation Board
| 资料速率：10.3125 GBd | |
|---|---|
| 产品种别：MTPR/MPO | |
| 光纤样式：Multimode Glass | |
| 最远距离(M)：150 | |
| 标称光波长 (nm)：850 | |
| 发射器：VCSEL |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
AFBR-83EDxxZ
AFBR-83EDxxZ
The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.
The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
AFBR-83CDxxZ
AFBR-83CDxxZ
AFBR-79Q2EKZ
AFBR-8420EVK
AFBR-8420EVK
The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.
SFF-8074
SFF-8074
The SFP extender board was designed to access SFP low speed control signals while a DUT SFP compliant to SFF-8074 is plugged into the target application system such as a network switch and router. TX & RX high speed signals are routed on the board with 50 ohm transmission lines to maintain signal integrity.
AFBR-83EVK
AFBR-83EVK
The Avago AFBR-83EVK evaluation kit is designed to provide designers with a convenient means of evaluating the electrical and optical performance of Avago CXP and CXP AOC fiber optic transceiver modules.