±ê×¼¹âÄ£¿é
MicroPOD 12x10G Receiver Module
Specifications
- ²úÆ·ÐͺÅ: FT-MicroPOD
- ¼æÈÝÆ·ÅÆ: ȫϵÁÐ
- ·â×°ÀàÐÍ: MicroPOD
- ´«ÊäËÙÂÊ: 12x10G
- ´«Êä¾àÀë: Avago VCSEL Array Transmitter/PIN Array Receiver
- ·¢É䲨³¤: Avago VCSEL Array Transmitter
- ÎüÊÕ²¨³¤: Avago PIN Array Receiver
- ÊÂÇéζÈ: ÉÌÒµ¼¶0¡æ¡«+70¡æ/¹¤Òµ¼¶-40¡æ¡«+85¡æ ¿ÉÑ¡
- Êý×ÖÕï¶Ï: ´øDDM
- ÎüÊÕѸËÙ¶È: MicroPOD 12x10G Receiver Module
- ÎüÊÕѸËÙ¶È: MicroPOD 12x10G Receiver Module
Description
MicroPOD 12x10G Receiver Module
Features [-]
- Compliant to IEEE 802.3ba 100GbE (100GBASE-SR10 and nPPI) per lane
- Compliant to 12¡ÁQDR InfiniBand
- Operates at 10.3125 Gbps per channel with 64b/66b encoded data for 100GbE application and at 10 Gbps with 8b/10b encoded data for IB-QDR application
- High Aggregate bandwidth: 120 Gbps per module
- High density footprint: 7.8 mm ¡Á 8.2 mm ¡Á 3.9 mm size
- Separate transmitter and receiver modules;
- 850 nm VCSEL array in transmitter; PIN array in receiver
- Links up to 150 m at 10.3125 Gbps with OM4 4700 MHz?km 50 ?m MMF
- Optical Interface: PRIZM? LightTurn? optical turn 1¡Á12 ribbon fiber connector
- Electrical interface: 9¡Á9 micro-LGA with 0.7424 mm pitch
- Low Power consumption: 3.0 W Max per Transmitter / Receiver pair (0 ¡ãC to 70 ¡ãC operating range)
- Dedicated signals for module address, module reset and host interrupt
- Two Wire Serial (TWS) interface with maskable interrupt for expanded functionality including:
- Individual channel functions: disable, squelch disable, lane polarity inversion, TX eye margin enable
- A/D read back: module temperature and supply voltages, per channel laser current and laser power, or received power
- Status: per channel Tx fault, electrical (transmitter) or optical (receiver) LOS, and alarm flags
- Programmable equalization integrated with DC blocking caps at transmitter data input
- Programmable receiver output swing and deemphasis level
- Field-upgradable firmware capability
- 0¡ãC to 70¡ãC case temperature continuous operating range. 85¡ãC supported for short durations
Applications [-]
- 100 GbE and IB-QDR / IB-DDR / IB-SDR interconnects
- Data Aggregation, Backplane and Proprietary Protocol and Density Applications
- High Performance and High Productivity computer interconnects
- Switch Fabric interconnects
Documents [-]
Data Sheets & Technical Specifications
- Product Brief - MicroPOD?, FT-MicroPOD77D1SZ, FT-MicroPOD78D1SZ, 10 Gbps/Channel, Twelve Channel Parallel Fiber Optics Modules (236 KB,PDF)
Quality & Reliability
- Regulatory Certificate - Fiber Optic Transceiver - TUV Regulatory Certificate (113 KB,PDF)
- Regulatory Certificate - UL-10SC02109 (222 KB,PDF)
Related Products
CFP-100G-SR10
- Transmission data rate up to 11.2Gbit/s per channel
- CFP MSA compliant
- Compliant to IEEE 802.3ba specification for 100GBASE-SR10 links
- Up to 11.2 Gbps per channel bandwidth,
- OTU4 compatible
- 10 channels 850nm VCSEL array
- 10 channels PIN photo detector array
- OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
- MDIO digital diagnostic and control capabilities.
- compliant to CFP MSA Management Interface Specification, Draft 1.4
- TX input and RX output CDR retiming
- Hot pluggable electrical interface
- Power class 1 (<8W max)
- Operating case temperature 0¡ãC to +70¡ãC
- 3.3V power supply
- RoHS 6 compliant(lead free)
CFP4 Optical Transceiver
This CFP Multi-Source Agreement (MSA) defines the CFP4 form factor of an optical transceiver which can support 40Gbit/s and 100Gbit/s interfaces for Ethernet, ITU-T OTN and other applications. Specifications provided in this document are given as a ¡°delta¡± to the CFP MSA Hardware Specification Rev.1.4 or the CFP2 Hardware Specification Rev. 1.0.
SNAP12 Parallel Receiver Module
SNAP12 Parallel Receiver Module - Commercial Temperature (SNAP12-RX-X):F-tone's SNAP12 receiver module is designed to be used in links of up to 32Gb/s over multimode fiber. They are RoHS-6 compliant and lead-free per Directive 2002/95/EC and F-tone Application Note FT038.
SNAP12 Parallel Transmitter Module
SNAP12 Parallel Transmitter Module:F-tone's SNAP12 transmitter module is designed to be used in links of up to 32Gb/s over multimode fiber. They are RoHS-6 compliant and lead-free per Directive 2002/95/EC and F-tone Application Note an38.
100Gbps 10channel CXP Optical Transceiver
The F-tone CXP-100G-150XX is a 10-channel CXP pluggable optical transceiver module for 100 Gigabit Ethernet applications. The transceiver is optimized for high-speed, short-range data communications. It has 10 data lanes in each direction with greater than 100 Gbps of aggregate bandwidth. Each lane can operate at 10.3125 Gbps up to 100 meters using OM3 fiber and 150 meters using OM4 fiber.
150Gbps-12channel CXP Transceiver
The F-tone CXP-150G-XX is a 12-channel CXP pluggable optical transceiver module for 100GbE+ applications. The transceiver is optimized for high-speed, short-range data communications. It has 12 data lanes in each direction with an aggregate bandwidth of 150 Gbps. Each lane can operate at 12.5 Gbps up to 50 meters using OM3 fiber and 65 meters using OM4 fiber.